What do we do at conferences?

Hard work, sort of: Puerto Varas

Conferences are important in geology as a way to share your research with others in your field, as well as a way of networking. Especially in a super international field like volcanology, it’s a really good opportunity to meet others whose names you recognize from papers you’ve read/cited, old friends from the other side of the world, and potential future collaborators.

As I mentioned, volcanologists usually find a way to have their conferences in volcano-y places, and Puerto Varas fits the bill. It’s fairly close to two volcanoes, Calbuco and Osorno, and was even impacted by the 2015 eruption of Calbuco. Puerto Varas is considered the “German” town in Chile, as such is has a lot of European influence in the culture. It’s also a bit touristy, so it felt a little less “Chilean” than the smaller towns I’d been in to this point.

A geologic conference usually involves lots of talks and posters. You get a big program at the beginning, and you decide which ones interest you the most or are relevant to your research. It also means if there’s people you want to meet, you can get an idea of where they might be during the conference. I had a poster during the second half of the conference, which meant the rest of the time I was free to attend as many useful talks and visit as many interesting posters as I could.

This conference had three streams of talks going at once, usually split into different categories ranging between physical volcanology (chemistry, physics, fieldwork, etc.) and volcano communications/social science, so you could hop around as things went to get a good mix of all the subjects you wanted to learn about. The poster sessions also had a mix of all the categories so you could talk to people from all parts of the volcanology community.

Many of you know that I like making films about my and others’ research. I’m not alone! I was really excited that a couple of volcanologists from universities in England were hosting a movie session one evening (the VolcanOscars!), showing self-made geology movies from conference attendees. I submitted my Vanuatu movie about Ben’s research on Yasur, and it was pretty surreal to see it up on the big screen with a room of 100 or so people ooohing at the explosions.

As part of the conference, we had a field and cultural trip in the middle. Since so much of Cities on Volcanoes is about understanding the relationship between people and volcanoes, we visited a town, Río Blanco, that had been affected by lahars (volcanic mudflows) from the 2015 eruption of Volcán Calbuco in order to see the effects firsthand and talk to some of the townspeople.

We were able to see the lahar path and some affected buildings, and we were treated to a presentation by some of the local officials on what it was like living through the eruption. They told us what their experience was, people’s reaction, the government’s response, and how they feel about the possibility of a future eruption. All in Spanish, of course, but one of the conference organizers helped to translate as we went.

After the conference: Osorno and a bit more

Once the conference had finished, I had a couple days left in Puerto Varas before the next part of my trip. To take advantage of that time, Sophia, a fellow Auckland PhD who I was staying with, and I booked a tour to Osorno volcano. In the end, we got driven there and shown around by two Chilean guys, a bit surprisingly, all in Spanish, meaning after a week of mostly English at the conference I got to hablar español un poco mas!

With my time in Chile ending, I explored PV for another day, sent some postcards, enjoyed some more Chilean food, and then, since I was in the same hemisphere, I caught a flight back to Santiago so I could fly back to the US for a quick trip home.

American montage

A few more hours in Chile: Santiago

After seeing family and doing a fun things, I had a much-delayed, fairly hellish trip back to New Zealand via Chile. The one bright spot was a long-enough layover in Santiago that gave me a chance to go into the city for a little more sightseeing. I had one last ceviche and took a funicular to the top of San Cristobal Hill.

And from there, I finally made it back to Auckland, where I could enjoy my bottle of Chilean pisco in peace.

What do volcanolgists do on vacation?

As I sit in a lab in Australia waiting for my samples to make it through quarantine, maybe it’s a good time to continue my hopeless attempts to catch up on my horribly neglected blog. So, this time…CHILE!

Part of academia is going to conferences to share your research with other scientists in your field. As volcanologists, we are pretty good at making sure those conferences also often happen to be in places with awesome volcanoes. That way we can learn about local interesting geology in addition to presenting our work. I was lucky enough to attend the Cities on Volcanoes 9 conference in Puerto Varas, Chile, last November. It’s a conference all about volcanoes and the people who live near them (hence the name), hazard mitigation, communication, and more.

I was able to head to Chile a week before the conference to have a bit of a travel vacation with my workmate Mary Anne. What did I do on this vacation? Well…there’s a lot of nice scenery in Chile, and much of it includes tall pointy mountains that hot rocks come out of…and I may have spent most of my time looking at that.

But first, Santiago!

On our way to the Región de los Lagos, the part of the country where the conference was, we had a one day stop in Chile’s capital, Santiago. Enough time to take a look around, check out some nice parks and markets, and have some great food.

 

Onwards to volcanoes: Hornopirén

The next day Mary Anne and I flew down to Puerto Montt, the city at the northernmost end of Patagonia, and rented a car so we could drive to some of the more out-of-the-way areas to the south. We were taking the Carretera Austral, the road that goes from the end of the Pan-American Highway as far south in Chile as you can go. It’s very much still a work in progress. Much of it is unpaved, and there are several ferry crossings where the road comes to an end.

Our first stop was in Hornopirén, a small town near a national park and a few volcanoes. We did our first ferry crossing and found our way to a nice cabaña with fireplace–lucky since it spent the next day raining so hard we could barely do anything!

We were supposed to head on fairly quickly to our next location, but a ferry scheduling issue meant we had to stay an extra day. The silver lining was that it meant we had time to do the things we were rained out of the first day. We had a great hike to Lago Cabrera, the site of Chile’s biggest volcanic death toll. In the 1950s there was a rockfall from Yate volcano that fell into the lake, which caused a tidal wave destroying a settlement on the other side, killing 26 people.

Onward to…more volcanoes?: Parque Pumalín

Once we finally sorted our ferry, we headed off further south. First a 3 hour trip, a short driving break, and then another short ferry ride to get to Parque Pumalín, a privately maintained conservation area with beautiful views and–you guessed it–a few more volcanoes!

The park is home to Chaitén volcano, which had a violent and destructive 2008 eruption, severely affecting the nearby town of the same name. As we drove through the park to the town where we were staying it was easy to see the effects of that eruption.

Our host gave us some recommendations for hikes the next day. Of course we were going to climb a volcano (duh…) but we had more time than that. We used to visit some waterfalls and more alerce trees. Our first hike was the Cascadas Escondidas trail, or the “hidden waterfalls”.

But of course the start of the show was Chaitén volcano. We took a few hour hike up to the top in the afternoon and got great views of the still smoking dome.

Back to work!: return to Puerto Varas

Our pre-conference week was coming to an end, so we hopped on a 9-hour ferry back up to where we started. I got to work on my Spanish quite a bit more by watching some extremely family-inappropriate pirated movies that were being shown and had a chance to get a different view of some of the places we’ve been.

Upon getting back, we had one more day with the car, so we took a trip to the the Saltos de Petrohué, a series of rapids and waterfalls near still more volcanoes!

Another thing that was fun about the trip to this point was the language. While I studied Spanish all through high school and have practiced it beyond that, I’ve never had the chance to use it in a practical setting before. In the places we went, most people spoke no English, so I had to stretch my Spanish knowledge to its limit, and it was super fun. I felt like I was improving as the trip progressed, and really happy with how well I did.

Halfway point in the trip is a good point for a break! I promise I will finish the second half soon! You believe me, don’t you?

Boom! Boom! Explosions!


Mission: See a Real Volcanic Eruption

Country: Vanuatu

Island: Tanna

Volcano: Yasur

Last August, I was presented with a can’t-miss opportunity. My officemate, Ben, who shares a supervisor with me, has an awesome PhD project working in Vanuatu. As the main part of his project, he planned to live at the base of the volcano, collecting a whole series of measurements, for three months. This includes stuff like seismic (earthquake) data, thermal (infrared) images of eruptions, gas measurements, and physical observations. For details on the project, watch the video above.

As you might expect, a project with this many facets is too big for one person to do alone. Ben (along with his supervisors) planned the project and held the responsibility of keeping things up and running the whole time, but he needed some help setting things up at the beginning and doing the work all along. To do this, my supervisor sent several of us in the department out to help over the course of the trip. I was offered the chance to go at the very start and help things set up.

Did I mention Yasur is basically the most consistently active volcano in the world? It’s been erupting more or less constantly for over 1000 years. As a volcanologist who’d never seen a live eruption before, do you think I could pass that up? Not a chance!

We spent the first couple of days in Port Vila, Vanuatu’s capital on the island of Efate (Vanuatu is made up of around 80 islands). It has about 40,000 people, and, while maybe not as “modern” as you’d get in New Zealand, it’s as urban as you’re going to get in Vanuatu (and many things we had access to there would’ve been the height of luxury during the fieldwork). We had to sort the logistics of getting all of Ben’s scientific equipment from there over to Tanna, one of the outer islands where Yasur volcano is located. Luckily, in between running back and forth between shipping agencies, we also had a bit of time to explore.

I also got my first taste of Bislama, the local language. Vanuatu has over 100 different indigenous languages, the most per capita of any country in the world. There’s a decent amount of English and French spoken (they are both official languages along with Bislama) in addition to the indigenous ones, but Bislama is the one that brings everyone together. It’s a creole of French and English, with a bit of grammar and vocabulary from each. While confusing at first, it actually makes a lot of sense when you read the sentences out loud, and it’s a lot of fun to try to understand.

From Vila, we took a little Twin Otter plane (you could look right into the cockpit) over to Tanna to start our real work.

The volcano is in the southeastern part of the island, so we took a slow pickup truck ride over there from the airport (on the west coast near Lenakel, the largest town on the island…which is so small I can’t even find a population estimate on the internet). To get a good start, we quickly headed up the volcano that evening to get a first view of the fireworks…unfortunately, it took a bit to figure out how to take good pictures of the explosions, so you’ll just have to be patient (or scroll down if you can’t wait!). In the meantime we settled into our lodging at Jungle Oasis Bungalows.

It’s a nice place, but pretty basic. Don’t come out here expecting modern amenities. No hot water, electricity on generator power for just a few hours every evening, pretty simple food, lots of pretty large insects. For a week and a half, it made the fieldwork that much more involved, and even a bit fun. For three months? Let’s just say I’m not jealous of Ben on that front. Still, it was great to have real beds and a (mostly) stable roof over our heads, and Kelson, the owner, is super ambitious and entrepreneurial, so improvements are constantly being made–he apparently built a restaurant in the couple months after I left, and I wouldn’t be surprised to find things completely different if I ever go out there again!

But you want science and volcanoes, don’t you? So did we! We started right into it the next day, hiking all around the volcano to set up some equipment and scope out sites for other bits.

And then we got to the top and got to see the fun explosions! Yaaaaay!

We took advantage of the presence of Shane and Jen, Ben’s supervisors at University of Auckland, to set up all our equipment over the next few days. That involved a trip to grab all our gear that had come over on a ferry and trekking more around the volcano to get the best spots for everything. It also involved a shovel, lots and lots of duct tape, some ants, and a lot of witty scientific banter.

As a reward for our hard work, we decided to go watch the fireworks again. This time I had my shit together so I could provide you with pretty pictures!

We also had to set up the thermal cameras. Since these see infrared light, they can see the eruption’s heat signal even if it is too cloudy or ashy to see with a normal camera or a human eye. It was pretty crazy working right on the volcano’s edge with the eruptions going on. Someone definitely always had an eye on the ballistics and the plume for safety!

Another important part of our job was the gas measurements. To do this, we have to travel back and forth underneath the ash plume to measure how much of certain volcanic gases are in it. On lucky days I got to sit on the back of Kelson’s pickup truck and drive back and forth quickly multiple times to get measurements while Ben operated it from inside. On not so lucky days, we had to walk back and forth across the ash plain on foot, one of us holding the computer while the other held the FLYSPEC.

After Shane and Jen left, it was just Ben and me for the next week. We continued all of our measurements and observations daily. As exciting as it was, it was also routine. Every morning, climb the volcano, sit and observe for two hours while taking notes, check the thermal cameras. Then head back down, out to the ash plain to do gas measurements and collect ash samples. It was really cool to see the volcano change in behavior over the course of the week, sometimes explosive, sometimes more ashy.

…but now you’ve been patient, waiting for the pretty pictures. So here they are.

We didn’t go up to the summit every night, but definitely did a few more times, because it was just too good opportunity to miss.

Finally, at the end of the last night, I found the perfect location for a photo. The activity had died down quite a bit, so I had to be patient, but eventually it paid off.

And with that, my two weeks of service were done! I left Ben to stick it out for another 10. Luckily he had some great helpers take my place.

Another fun part of the trip was making the movie at the beginning of this post. I spent a lot of the trip filming everything I thought might be interesting (and probably annoying the crap out of everybody else). Then, toward the end of my stay, I made Ben sit for some formal interviews that turned into the narration of the video. Editing it all together at the end was a good excuse to continue watching explosions for some time even after I’d returned!

Note: All photos with me in them were taken by Ben, all photos with me not in them were taken by me.

 

This Is How We Do It

A quick follow up to yesterday’s post — I made a fun video of our fieldwork trip so you can see exactly what we’re up to, and set it to a jaunty tune. Enjoy!

I’m really enjoying trying to tell stories about science through film, and I hope I can do a lot more of it in the future. I’m actually currently taking a course the the organization called SciFund on how to make good science youtube videos, so hopefully there will be more where this came from!

Science, dammit!

Buckle up for some geology! Now that you’ve seen what it takes to get to the top of a 2518m high volcano, let’s see what happens when you do it a second time. Only with shitloads of stuff strapped to your back and actual things to accomplish once you get to the top.

As I mentioned, one of the best places to find recent material from Taranaki’s last eruptions is way up at the top. Looking at Taranaki’s most recent lava flows can help us in lots of ways. We can compare it to material we find lower on the volcano. We can look at fresher and more weathered material. We can look at different parts of the lava dome to see if the lava cooled at different rates in different places and try to learn what ways it affects the lava’s properties.

But the simplest thing we can try to do with those hot hot lava rocks (that are now cold) is try to figure out how old they are. If we decide that the lava dome at the top of Mt. Taranaki’s collapse was probably the last thing to happen there, then if we figure out how old those rocks are, we can probably tell when the volcano last erupted.

(The reason we don’t know this already is because the last eruption was before European settlement of the area. From this we know it must be older than at least the mid-1800s. Maori people were there at this time, for sure, but as far as I know there aren’t any datable written records or stories tied to an eruption.)

Our goal for this trip was to collect samples that I could try to date using paleomagnetic methods in the lab in Wellington. On my trips lower down you may remember me collecting rock samples that I would drill holes in in the lab later. But this time we decided to go full on and collect our cores in the field in order to be as accurate as possible.

This was a bigger job, though, so it required a bigger team. A both of my Auckland-based supervisors, Shane and Mike, and a couple fellow students from Auckland, Edgar and Jie, came with me, along with my friend Elisa, our Wellington-based paleomag expert.

For starters, the trip was longer than the first time. We’d be climbing two consecutive days, meaning we had to carry a whole bunch of food in addition to our gear (and possibly some lovely boxes of wine–we do our geology in style!). Oh, yeah…the gear. Hammer, chisel, chainsaw-sized drill and all its accessories, and more. Heck of a lot more than I had on my fun first climb.

We made our camp at the same awesome Tahurangi Lodge that I stayed at last time. It was definitely nice to have a little comfort at the end of the day.

From there, our first job was to hike to the top. Now, doing paleomag drilling is simple enough when your outcrops are by the roadside. Stop somewhere and fill up your water tanks, pull up on the side of the road, do your thing, go home. If you run out of water, just fill up again and get back to work.

 

In our case, however, we had to get all that same stuff to the top of the of the volcano to get to our sample sites, and there was nowhere to get more water once we were up there (we gave some thought to melting snow, but couldn’t come up with an efficient enough solution). That meant splitting up about 45 liters of water, a couple liters of fuel, and all the drill stuff between everyone for the trip up. It was probably the most difficult fieldwork I’ve ever done — steep enough as is, but even harder when weighed down by a super full pack.

But we did make it! Hooray! Once we were up there, we moseyed around to the western side of the summit to see the collapsed crater. That’s where the volcano’s most recent lava dome grew, then collapsed, leaving a giant horseshoe-shaped amphitheater behind. This was probably sometime in the 1800s, but we don’t yet know for sure.

In order to compare different parts of the dome and learn as much as we can about Taranaki’s most recent activity, we needed samples from lots of different parts of the dome, which meant climbing all around the collapse amphitheater and around the snow fields to pick out a few different sites to core.

Once we’d taken a good look, we picked some sample locations on different parts spread around the area and got to work drilling our cores. Drilling and orienting is a team effort. For the most efficient work, it takes two to drill–one to do the actual drilling and one to man the pump bottle to keep water running through the drill so it operates well. Then it takes another one or two to take accurate measurements and write careful on the cores and collect them to take home — that way the drillers can already move on to the next site. ***drilling note at end***

In order to learn more about the formation of the lava dome, we made sure to take samples from both the outside carapace of the dome that had cooled and remained in place as well as the fresh material that is newly exposed where the side of the dome collapsed. That way we can try to look for differences between the two types: Did one cool faster? Do they contain the same minerals? Are the mineral crystals different sizes? Did they record the same paleomagnetic field?

As you saw in the picture above, we usually drill about 8-12 small holes per site, and on the first day we were able to do five sites. Not bad for a day’s work! And we felt pretty good about having carried all that water since we used almost all of it. Imagine how upset we would have been if we’d worked so hard to get up there and then quit early because we ran out!

On the way down we were treated to some pretty awesome views or the surrounding area. The perfect circle of the edge of the park still impresses me. Combined with the shadow Taranaki casts in the evenings, it’s a pretty unusual sight.

Back at the lodge were were able to have some delicious soup packets, tea, dinner, and wine, and rest up for day two.

So did I complain about the first day being the hardest fieldwork I’d ever done? I was being a wuss. Day two was the hardest fieldwork I’ve ever done. Carrying all the same stuff up the volcano a second straight day was seriously hard work and at times frustrating (especially when constantly sliding backwards trying to climb the scree field) — early on I was genuinely concerned I might not make it! But after some tough times in the early going, we actually all made it to the top faster than we did on the first day.

The weather wasn’t nearly as good the second day, it was quite a bit chillier, and visibility was pretty low. Luckily my supervisor had a good idea where we were going. We did another four sites — some were more parts of the lava dome, but we also sampled The Turtle, an interesting feature a little ways down from the top that is very visible when looking at Mt. Taranaki from the west. Despite some tough conditions and a bit of slipping and sliding, we stayed focused, worked hard, and got everything we needed so that all our sarcastic comments about having to come up a third straight day could just remain jokes.

After staying another night in the lodge, we were able to head home with all the samples we needed to do a good investigation, and also comfortable in the knowledge that if we ever need to come back and get more samples, we’ll know exactly what to do. I’ve already gotten my teeth into testing the samples from this trip in the paleomagnetism lab down in Wellington, and though we don’t have any conclusive results yet, we’re well on our way to learning a lot more about the lonely volcano.

***Note on drilling: Mt. Taranaki is a beautiful and culturally important mountain. As such, we make our best effort to be as non-disruptive and non-destructive as possible when doing fieldwork. But sometimes the only way to do the science is to take the samples, as in this case. Before we even planned the drilling, we consulted with the NZ Department of Conservation and local iwi to get all proper permissions for the work and to make sure we did it in a way where all parties involved could be happy. When actually on the mountain, we always made an effort to drill our cores in places far off the beaten path where they won’t bother anyone, and often in areas where weathering and further collapse will likely remove them altogether over time.***

Who wants to climb a volcano?

I promised some more geology lessons way back when and I haven’t followed through very well on that, but now I’ll try to make good on that promise. Or at least, I’ll lay the groundwork for the some science.

While I’ve mentioned before I’m interested in all the deposits on the northwestern side of Mt. Taranaki because they are the most recent, the other best place to find really recent stuff is by going straight to the source. What’s younger than the lava right at the top of the volcano?

Before we did any serious sample collecting, I decided to take a recon/fun trip to the top to see what it was like. That way when I planned the serious fieldwork, I would know what I was getting us into. Where do we want to sample? How hard is it to get there? How much can we do in a day? Etc.

My plans for this coincided perfectly with my geo-friend  and super-adventurer Aurelia’s arrival in NZ back in February, so we headed down there to check things out. After driving up to the visitor’s centre, we hiked about 1.5 hours in to the Tahurangi Lodge, an awesome mountain house owned by the Taranaki Alpine Club (that generously let me join), where we stayed for the first night. This gave us a nice head start for the real climb.

The next morning we got an early start and headed up to the top. It was quite the climb! Not technically difficult in any sense, anyone in good enough shape could do it. But that doesn’t mean it wasn’t pretty hard work! From the lodge, there’s three main sections to go through to get to the top. The first third is just dirt tracks and steep, long staircases. The second third is probably the hardest–a huge field of loose scree that shifts under you every time you take a step, meaning progress is pretty slow and frustrating. The final third is a scramble over a series of rocky, jagged lava flows called “the Lizard”.

Finally, after these trials, you reach the crater. And despite it being summer, it was full of snow! The crater contains Taranaki’s current summit lava dome, which was created during its most recent eruptions and rises to the volcano’s highest point of 2518m. It’s also collapsed to the northwest, as we’ll talk about later.

After exploring the crater for a while and taking note of good sampling sites (and even taking a short nap while we waited for some clouds to blow through), we were almost ready to head back down. We wanted to go up to the very top, but it was so foggy that it didn’t seem worth it. Luckily we decided to go for it anyway, because just as we reached the summit everything cleared up and we got a great view.

The way back down was quite a bit faster (from the lodge, it was a bit under 3 hours to the top but less than 2 hours to cover the same distance on the way down). As much trouble as scree fields are to climb, going down they’re super fun. If you’re willing to end up on your butt a few times, you can kind of jump from foot to foot and ski down as it shifts under your feet. Whee! After stopping for a short break at the lodge, we hiked out the rest of the way. Surprisingly, the final hour or so, which should’ve been the easiest part, was actually frustratingly hard because my stupid wobbly toddler legs wouldn’t go where I wanted them to and we couldn’t walk properly. Nonetheless, we made it! The next day was the sorest I’ve probably every been (but, you know, in a good way). And this was just the test run for the real thing!

Now that I’d been there and knew what things were like at the top of Taranaki, I was ready to plan our big sampling expedition! See, now you’re ready for the science next time.

Oh yeah, as a bonus, check this out! While we were up there we shot an (only slightly embarrassing) educational video for my mom’s 3rd grade class that my brother edited into an awesome geology lesson. I think it turned out pretty well!

Just Me and the Big Dude

Toward the beginning of my PhD I won a scholarship from an organization that gives grants to students doing research in the Taranaki region, and as part of the bargain I agreed to come down to New Plymouth in early December to give a public lecture at the Puke Ariki, the city’s big cultural and natural history museum. I decided that while I was down there already I’d take the opportunity to do one last batch of fieldwork before the end of the year.

My co-supervisor at Victoria University of Wellington drove up and met me in Oakura (a small town in the northwest part of the peninsula), and we planned a couple days of exploring and sample collection.

IMG_2396.JPG

Protip: When possible, do fieldwork with your supervisor(s). They tend to pay for cushier lodging and tastier food than when you do it yourself. 😉

I’ve already told you about looking for stratigraphic sections and learning to tell apart the different types of deposits that I look at during my fieldwork. And about mapping those deposits in different places. Naturally, the next step is to actually take samples of those different deposits to take back to the lab for testing.

I had already done a good bit of sample collection on the last trip (the one forever lost to the annals of my dead hard drive), but there was plenty more to do in the same (and new) places, so off we went back into the park, up the Puniho track, and into Maero Stream.

We started by climbing up toward the “type section” I’ve already told you about, but this time we decided to push on a bit farther and see what lays higher up the stream. The first thing we noticed on the way up was a really red outcrop, different from anything we’d seen so far. Farther on up we also found a potential good spot to get into and out of the riverbed, which might be good to know about for future trips. It would be very convenient to be able to follow the easy track much further along rather than having to climb up the rocky stream bed.

We stopped at the red unit again on the way down to take some samples. What does that mean, exactly? Well, basically, there’s a few different types.

  1. Matrix and clast samples: Basically, I just scoop a bunch of stuff that I think is well representative of the outcrop into a sandwich baggie. The matrix is the sandy stuff in between the clasts (the pebble to boulder rocks contained in the matrix).
  2. Oriented core: We use a drill (I’ll show more later) to take a little cylinder, roughly the diameter of a quarter (NZ/Euro 50c coin) and around 4-8 cm (2-4 in) deep.
  3. Oriented hand sample: When we can’t drill a hole in the field, instead we just take the rock home instead so we can drill a hole in it back in the lab.
  4. Charcoal: For radiocarbon dating you need stuff with lots of carbon. One thing with lots of carbon are burnt bits of trees, leaves, and twigs.

So notice I used the word “oriented” a few times in the sample names. That’s because for paleomagnetism direction is everything. Later in the lab we’ll be trying to figure out the direction of earth’s ancient magnetic field. But to do that, we need a reference point for the direction of the rock when it was deposited. So we spend a lot of time recording with compasses and marking the rocks with sharpies so we’ll be able to test accurately later on.

Another question you may have is “what if you don’t find any big enough rocks to take as oriented hand samples?” It’s a good question, and this time out we got to test another sampling method, where we hammered a little plastic box into the fine grained material and took an orientation of it (see picture above) in order to get a sample. It will be interesting to see if it works. We also found some little charcoal bits for the first time, which should be helpful.

After some pretty lousy weather on the first day, we got much better conditions on day two. Here, we found some good outcrops right along the road to ample, which meant we could test out our drill. Vroom vroom!

We only tested a couple times, but we drilled two useful cores. Funny thing was, the drill was tough to get started…but then once it got going we couldn’t get it to shut off! A Hanukkah miracle! Eventually we just had to remove all the fuel and let it run itself down.

After finishing fieldwork on the second day, my supervisor took off for home, and I went to do the actual purpose of my trip–the talk at the museum. Basically, I got to do my proposal defense, but slightly longer and for a broader audience. It was quite fun, a good chance to get to talk to people in the area and get their perspectives on the volcano. And of course a great chance to screen Geology: The Movie (provided here for your education and entertainment just in case you haven’t seen it or want to watch again).

When I finished with that, it was time to celebrate. Fancy dinner? Chill on the beach? Nah, how about we climb a volcano instead?

I took a drive around the northeast side of the volcano to a place where you can actually drive a decent ways into the park to the North Egmont Visitor Centre. As I got closer I willed the small bits of clouds that remained in the sky to drift away. “Show yourself, you majestic fucker!” And show himself he did.

From the visitor centre I started off on the summit track. While my field area is on the western side of the volcano, this is probably the easiest route to the top, and I imagine this is the way we go when we get around to doing fieldwork at the summit. For this trip, I wasn’t intending to go all the way up and back, that takes a full day. I just wanted some quality time with just me and Taranaki and to see how far I could get in an hour or so.

The track (as far as I took it) is well paved and easy to follow–that’s not to say it isn’t quite steep and strenuous all the same. And that’s the easy part! I got pretty high up, almost to the bottom of the volcano itself, but it’s quite the climb to get to the top. Still a bit too much snow to do it at the moment, as well, but hopefully I’ll get back there in January or February when things are clearer.

That just left me with a little more fieldwork to do on the final day before driving home, as well as one important pit stop on the way home.

With that, I’m done with fieldwork for the year. After wrapping things up at the office, I’m off on a holiday visit from my parents and a whirlwind tour around both the North and South Islands.

Have a good end of the year everyone, see you in 2016!